If your plastic, rubber, or composite part has to survive real-world stress — bending, impact, crushing, or years of cyclic load — you need proof, not guesswork. Kiyo R&D Lab runs a dedicated mechanical properties testing lab in Chennai, using calibrated Universal Testing Machines (UTM) and ASTM/ISO methods to turn a sample into a full stress-strain picture.
From tensile strength testing Chennai teams rely on for material qualification, to flexural, impact, hardness, and compression testing on the same UTM setup, our mechanical properties testing lab in Chennai gives design and quality teams the standards-referenced data they need before a part goes into production.
Every part — a connector housing, a gasket, an automotive bracket — has to survive the forces it meets in service: pulling, bending, sudden impact, sustained load, or thousands of repeated flex cycles. Mechanical properties testing turns those real-world forces into hard numbers, so material selection and design decisions are based on data instead of assumption.
At our mechanical properties testing lab in Chennai, every sample runs on calibrated Universal Testing Machines under ASTM and ISO methodology, so the results you receive are audit-ready and directly comparable across suppliers, batches, and material grades.
As a full-service mechanical properties testing lab, we cover the complete property range for plastics, rubber, and composites — from core strength and stiffness checks to long-term durability studies — often on a single sample submission.
Yield strength, ultimate tensile strength, and elongation per ASTM D638 and ISO 527.
Three-point bending per ASTM D790 to determine flexural strength and modulus.
Izod and Charpy impact testing per ASTM D256 and ISO 179.
Shore and Rockwell hardness per ASTM D2240 and ASTM D785.
Crushing-load behavior per ASTM D695 for gaskets, seals, and structural parts.
Cyclic loading (ASTM D671) and long-term deformation under sustained stress (ASTM D2990).
Our mechanical properties testing lab in Chennai follows ASTM and ISO methodology on every job, so results are directly comparable and audit-ready for OEM submission.
ASTM ISO
| Standard | What It Covers | Typical Use |
|---|---|---|
| ASTM D638 / ISO 527 | Tensile properties of plastics | Material qualification, spec compliance |
| ASTM D790 | Flexural properties via three-point bending | Structural and load-bearing components |
| ASTM D256 / ISO 179 | Izod / Charpy impact resistance | Automotive and drop-risk parts |
| ASTM D2240 / D785 | Shore / Rockwell hardness | Wear and surface durability prediction |
| ASTM D695 | Compressive strength | Gaskets, seals, structural components |
| ASTM D5045 | Fracture toughness | Crack-propagation and brittleness risk |
| ASTM D671 | Fatigue strength under cyclic load | Parts subject to vibration in service |
| ASTM D2990 | Creep resistance under sustained stress | Long-service load-bearing components |
| ASTM E132 | Poisson’s ratio | FEA and structural modeling inputs |
Beyond standard methods, our mechanical properties testing lab in Chennai also builds custom protocols around OEM specifications when a project calls for it.
Our mechanical properties testing lab in Chennai operates from two locations, so manufacturers across the region have a nearby drop-off point for samples.
Our headquarters lab handles the full range of mechanical properties testing, from tensile and flexural through fatigue and creep.
📞 Call 90420 86986 💬 Request a QuoteOur Oragadam branch supports automotive and industrial manufacturers in the Sriperumbudur belt with fast sample turnaround.
📞 Call 90420 86986 💬 Request a QuoteExplore all our capabilities at www.kiyorndlab.com.
Whether you need a single tensile check or a full mechanical characterization, our mechanical properties testing lab in Chennai delivers precise, ASTM/ISO-compliant results your engineering team can act on with confidence.
Reach out today and our team will respond to your mechanical properties testing lab in Chennai enquiry within one business day.
For quotation or visit